ABSTRACT
Total hip replacement is a very effective method to cure many kinds of hip joint illnesses. About a century ago, it was first used in clinic. Since then, total hip replacement has been well developed. Hip joints sustain the most load of body, so people pay great attention to the hip prothesis' mechanics property. Especially after the finite element analysis was widely used in biomechanics investigation, the stress distribution of different designs can be easily compared with each other, and the relatively better parameters of the design could be decided. The stress distribution of different materials with the same design also can be valued. However, studies have indicated that total hip joint replacement still has some disadvantages. Loosening of the hip prothesis is still the most likely cause of the failure of surgery, and generally this is believed to stem from either mechanical failure of the fixation in response to over high density stresses, or osteolysis of the surrounding bone stock responsing to particular wear debris. Many researchers on computational studies have considered the potential for the former one, but only a few have attempted to tackle the latter. The process of osteolysis of the bone is not yet completely known. Nowadays, in order to solve the problems of loosening, investigators are trying to find different methods. Some of them are working on improving the geometry parameters and the shape of the hip prothesises, some are trying to find new suitable biomaterials, and, at the same time, the fixation methods are under deliberation.
Subject(s)
Humans , Arthroplasty, Replacement, Hip , Computer-Aided Design , Finite Element Analysis , Prosthesis Design , Prosthesis Failure , Stress, Mechanical , Weight-BearingABSTRACT
@#Objective To investigate the morphological effect of fluid shear stress on pig iliac endothelium cells cultured solely or co-cultured with pig small intestinal submucosa.Methods The shear stress of 40×10-5 N/cm2 were carried out for 12 h on both groups.The images were recorded every 30 min.The directional angles were calculated.Results In the group of cell cultured solely:The defluvium of cells was obvious at the 1st hour,but the shape of cells didn't change.At the 4th hour,the defluvium of cells was little,the cell became round from its initiatory polygon shape.At the 8th hour,the defluvium of cell could not be observed.The shape of cells became fusiform and gracile.The cells arranged along the direction of flow field in the local area.At the 12th hour,the cells became more and more gracile.The trend of realignment of cells along the direction of flow field was obviously.The directional angles of cells at the 12th hour was significantly different from the zero hour.In the group of cell co-cultured with small intestinal submucosa:At the 1st hour,some of cells were brushed off mildly.The defluvium of cells could not been observed since the 2nd hour.The directional angles didn't change significantly in the 12 hours.Conclusion The shear stress of 40×10-55 N/cm2 cannot influence the cell of co-cultured but do influence the cell cultured solely.
ABSTRACT
A model of fluid dynamics related to the myocardial bridginged and mural coronary artery was designed and manufactured according to the physical principle and characteristic of the mural coronary artery. The model can imitate systematically well the effect of myocardial bridging on hemodynamic change of the mural coronary artery under different controlled experimental parameter. The methodology is proved to be feasible and has good prosperity of experimental study.